3com S7906E Guide De Référence
1-5
c-bsr priority (IPv6 PIM view)
Syntax
c-bsr priority priority
undo c-bsr priority
View
IPv6 PIM view
Default Level
2: System level
Parameters
priority: Priority of the C-BSR, in the range of 0 to 255. A larger value means a higher priority.
Description
Use the c-bsr priority command to configure the global C-BSR priority.
Use the undo c-bsr priority command to restore the system default.
By default, the C-BSR priority is 0.
Related commands: c-bsr.
Examples
# Set the global C-BSR priority to 5.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr priority 5
c-rp (IPv6 PIM view)
Syntax
c-rp ipv6-address [ group-policy acl6-number | priority priority | holdtime hold-interval |
advertisement-interval adv-interval ] *
undo c-rp ipv6-address
View
IPv6 PIM view
Default Level
2: System level
Parameters
ipv6-address: IPv6 address of the interface that is to act as a C-RP.
acl6-number: Basic IPv6 ACL number, in the range of 2000 to 2999. This IPv6 ACL defines a range of
IPv6 multicast groups the C-RP is going to serve, rather than defining a filtering rule. Any IPv6 multicast
group range that matches the permit statement in the ACL will be advertised as an RP served group,
while configurations matching other statements like deny will not take effect.