3com S7906E Guide De Référence

Page de 2327
 
1-21 
Description 
Use the display pim ipv6 rp-info command to view the RP information.  
Note that: 
The RP information includes the information of RPs dynamically found by the BSR mechanism and 
static RPs.  
Because a non-BSR router refreshes its local RP-Set only based on the received BSR bootstrap 
messages, the system does not delete an RP even if its expiry time is 0. Instead, the system waits 
for the next bootstrap message from the BSR: if the bootstrap message does not contain 
information of the RP, the system will delete it. 
Examples 
# View the RP information corresponding to the IPv6 multicast group FF0E::101. 
<Sysname> display pim ipv6 rp-info ff0e::101 
 PIM-SM BSR RP information: 
 prefix/prefix length: FF0E::101/64 
     RP: 2004::2 
     Priority: 0 
     HoldTime: 130 
     Uptime: 00:05:19 
     Expires: 00:02:11 
Table 1-9 display pim ipv6 rp-info command output description 
Field 
Description 
prefix/prefix length 
The IPv6 multicast group served by the RP 
RP 
IPv6 address of the RP 
Priority 
RP priority 
HoldTime 
Timeout time of the RP 
Uptime 
Length of time since the RP was elected 
Expires 
Remaining time of the RP 
 
embedded-rp 
Syntax 
embedded-rp [ acl6-number ] 
undo embedded-rp [ acl6-number ] 
View 
IPv6 PIM view 
Default Level 
2: System level