3com S7906E Guide De Référence

 

1-34 

2: System level 

interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.  

Use the pim ipv6 holdtime assert command to configure the assert timeout time on the current 

interface.  

Use the undo pim ipv6 holdtime assert command to restore the system default.  

By default, the assert timeout time is 180 seconds.  

Related commands: holdtime join-prune, pim ipv6 holdtime join-prune, holdtime assert. 

# Set the assert timeout time to 100 seconds on VLAN-interface 100. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] pim ipv6 holdtime assert 100 

pim ipv6 holdtime join-prune interval 

Interface view 

2: System level 

interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.  

Use the pim ipv6 holdtime join-prune command to configure the join/prune timeout time on the 

interface.  

Use the undo pim ipv6 holdtime join-prune command to restore the system default.  

By default, the join/prune timeout time is 210 seconds.  

Related commands: holdtime assert, pim ipv6 holdtime assert, holdtime join-prune. 

# Set the join/prune timeout time to 280 seconds on VLAN-interface 100. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100