3com S7906E Guide De Référence

Page de 2327
 
1-37 
View 
Interface view 
Default Level 
2: System level 
Parameters 
interval: Graft retry period in seconds, with an effective range of 1 to 65,535. 
Description 
Use the pim ipv6 timer graft-retry command to configure the graft retry period.  
Use the undo pim ipv6 timer graft-retry command to restore the system default.  
By default, the graft retry period is 3 seconds. 
Examples 
# Set the graft retry period to 80 seconds on VLAN-interface 100. 
<Sysname> system-view 
[Sysname] interface vlan-interface 100 
[Sysname-Vlan-interface100] pim ipv6 timer graft-retry 80 
pim ipv6 timer hello 
Syntax 
pim ipv6 timer hello interval 
undo pim ipv6 timer hello 
View 
Interface view 
Default Level 
2: System level 
Parameters 
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.  
Description 
Use the pim ipv6 timer hello command to configure on the current interface the interval at which hello 
messages are sent.  
Use the undo pim ipv6 timer hello command to restore the system default.  
By default, hello messages are sent at the interval of 30 seconds.  
Related commands: timer hello
Examples 
# Set the hello interval to 40 seconds on VLAN-interface 100.  
<Sysname> system-view