Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-38 
[Sysname] interface vlan-interface 100 
[Sysname-Vlan-interface100] pim ipv6 timer hello 40 
pim ipv6 timer join-prune 
Syntax 
pim ipv6 timer join-prune interval 
undo pim ipv6 timer join-prune 
View 
Interface view 
Default Level 
2: System level 
Parameters 
interval: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647. 
Description 
Use the pim ipv6 timer join-prune command to configure on the current interface the interval at which 
join/prune messages are sent.  
Use the undo pim ipv6 timer join-prune command to restore the system default.  
By default, the join/prune interval is 60 seconds.  
Related commands: timer join-prune. 
Examples 
# Set the join/prune interval to 80 seconds on VLAN-interface 100.  
<Sysname> system-view 
[Sysname] interface vlan-interface 100 
[Sysname-Vlan-interface100] pim ipv6 timer join-prune 80 
pim ipv6 triggered-hello-delay 
Syntax 
pim ipv6 triggered-hello-delay interval 
undo pim ipv6 trigged-hello-delay 
View 
Interface view 
Default Level 
2: System level 
Parameters 
interval: Maximum delay in seconds between hello messages, with an effective range of 1 to 5.