3com S7906E Guide De Référence

 

1-41 

By default, the register suppression time is 60 seconds.  

Related commands: probe-interval, register-policy. 

# Set the register suppression time to 70 seconds.  

<Sysname> system-view 

[Sysname] pim ipv6 

[Sysname-pim6] register-suppression-timeout 70 

IPv6 PIM view 

2: System level 

None 

Use the register-whole-checksum command to configure the router to calculate the checksum based 

on the entire register message. 

Use the undo register-whole-checksum command to restore the default configuration. 

By default, the checksum is calculated based only on the header in the register message.  

Related commands: register-policy, register-suppression-timeout. 

# Configure the router to calculate the checksum based on the entire register message.  

<Sysname> system-view 

[Sysname] pim ipv6 

[Sysname-pim6] register-whole-checksum 

reset pim ipv6 control-message counters [ interface interface-type interface-number ] 

User view