Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-42 
Default Level 
1: Monitor level 
Parameters 
interface-type interface-number: Specifies to reset the IPv6 PIM control message counter on a 
particular interface. If no interface is specified, this command will clear the statistics information about 
IPv6 PIM control messages on all interfaces.  
Description 
Use the reset pim ipv6 control-message counters command to reset IPv6 PIM control message 
counters.  
Examples 
# Reset IPv6 PIM control message counters on all interfaces.  
<Sysname> reset pim ipv6 control-message counters 
source-lifetime (IPv6 PIM view) 
Syntax 
source-lifetime interval 
undo source-lifetime 
View 
IPv6 PIM view 
Default Level 
2: System level 
Parameters 
interval: IPv6 multicast source lifetime in seconds, with an effective range of 1 to 65,535.  
Description 
Use the source-lifetime command to configure the IPv6 multicast source lifetime.  
Use the undo source-lifetime command to restore the system default.  
By default, the lifetime of an IPv6 multicast source is 210 seconds.  
Examples 
# Set the IPv6 multicast source lifetime to 200 seconds.  
<Sysname> system-view 
[Sysname] pim ipv6 
[Sysname-pim6] source-lifetime 200 
source-policy (IPv6 PIM view) 
Syntax 
source-policy acl6-number