3com S7906E Guide De Référence

Page de 2327
 
1-19 
Description  
Use the mld-snooping query-interval command to configure the MLD query interval.  
Use the undo mld-snooping query-interval command to restore the system default.  
By default, the MLD query interval is 125 seconds.  
This command takes effect only if MLD Snooping is enabled in the VLAN.  
Related commands: mld-snooping querier
mld-snooping max-response-time
max-response-time.  
Examples 
# Set the MLD query interval to 20 seconds in VLAN 2.  
<Sysname> system-view 
[Sysname] vlan 2 
[Sysname-vlan2] mld-snooping query-interval 20 
mld-snooping router-aging-time 
Syntax 
mld-snooping router-aging-time interval 
undo mld-snooping router-aging-time 
View 
VLAN view 
Default Level 
2: System level 
Parameters 
interval: Dynamic router port aging time, in seconds. The effective range is 1 to 1,000.  
Description  
Use the mld-snooping router-aging-time command to configure the aging time of dynamic router 
ports in the current VLAN.  
Use the undo mld-snooping router-aging-time command to restore the default setting.  
By default, the dynamic router port aging time is 260 seconds.  
This command takes effect only if MLD Snooping is enabled in the VLAN.  
Related commands: router-aging-time.  
Examples 
# Set the aging time of dynamic router ports to 100 seconds in VLAN 2.  
<Sysname> system-view 
[Sysname] vlan 2 
[Sysname-vlan2] mld-snooping router-aging-time 100