3com S7906E Guide De Référence
1-23
z
This command does not take effect in a sub-VLAN of an IPv6 multicast VLAN.
z
If configured in Ethernet interface view or Layer 2 aggregate interface view, this feature takes effect
only if the interface belongs to the specified VLAN.
z
If configured in port group view, this feature takes effect only on those ports in this port group that
belong to the specified VLAN.
Related commands: subvlan command in IPv6 Multicast VLAN Commands in the IP Multicast Volume.
Examples
# Enable the static router port function on Ethernet 2/0/1 in VLAN 2.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] mld-snooping static-router-port vlan 2
mld-snooping version
Syntax
mld-snooping version version-number
undo mld-snooping version
View
VLAN view
Default Level
2: System level
Parameters
version-number: MLD snooping version, in the range of 1 to 2.
Description
Use the mld-snooping version command to configure the MLD Snooping version.
Use the undo mld-snooping version command to restore the default setting.
By default, the MLD version is 1.
Note that:
z
This command can take effect only if MLD Snooping is enabled in the VLAN.
z
This command does not take effect in a sub-VLAN of an IPv6 multicast VLAN.
Related commands: mld-snooping enable; subvlan in IPv6 Multicast VLAN Commands in the IP
Multicast Volume.
Examples
# Enable MLD Snooping in VLAN 2, and set the MLD Snooping version to version 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable