3com S7906E Guide De Référence

 

1-25 

2: System level 

None 

Use the mld-snooping report-aggregation command to enable MLD report suppression.  

Use the undo mld-snooping report-aggregation command to disable MLD report suppression.  

By default, MLD report suppression is enabled.  

This command works on both MLD Snooping–enabled VLANs and VLANs with MLD enabled on their 

VLAN interfaces.  

# Disable MLD report suppression.  

<Sysname> system-view 

[Sysname] mld-snooping 

[Sysname-mld-snooping] undo report-aggregation 

reset mld-snooping group { ipv6-group-address | all } [ vlan vlan-id ] 

User view 

2: System level 

ipv6-group-address: Clears the information about the specified multicast group. The effective range of 

ipv6-group-address is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::), where x and y 

represent any hexadecimal number between 0 and F, inclusive.  

all: Clears all MLD Snooping multicast group information.  

vlan vlan-id: Clears the MLD Snooping multicast group information in the specified VLAN. The effective 

range of vlan-id is 1 to 4094.  

Use the reset mld-snooping group command to clear MLD Snooping multicast group information.  

Note that: 

z 

This command works only on MLD Snooping–enabled VLANs, but not on VLANs with MLD 

enabled on their VLAN interfaces. 

z 

This command cannot clear MLD Snooping multicast group information of static joining.