3com S7906E Guide De Référence

 

1-8 

# Reset DLDP state for GigabitEthernet 2/0/1 (assuming that GigabitEthernet 2/0/1 is shut down by 

DLDP). 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] dldp reset 

# Reset DLDP state for all the ports in port group 1 shut down by DLDP. 

<Sysname> system-view 

[Sysname] port-group manual 1 

[Sysname-port-group-manual-1] group-member GigabitEthernet 2/0/1 to GigabitEthernet 2/0/3 

[Sysname-port-group-manual-1] dldp reset 

dldp unidirectional-shutdown { auto | manual } 

undo dldp unidirectional-shutdown 

System view 

2: System level 

auto: Sets the port shutdown mode as auto mode, where, when a unidirectional link is detected, the 

port involved is shut down by DLDP. 

manual: Sets the port shutdown mode as manual mode, where, when a unidirectional link is detected, 

DLDP prompts you to shut down the involved port instead of doing so automatically. 

Use the dldp unidirectional-shutdown command to set the port shutdown mode. 

Use the undo dldp unidirectional-shutdown command to restore the default. 

By default, the port shutdown mode is auto mode. 

Related commands: dldp work-mode. 

# Set the port shutdown mode as auto mode. 

<Sysname> system-view 

[Sysname] dldp unidirectional-shutdown auto 

dldp work-mode { enhance | normal } 

undo dldp work-mode