3com S7906E Guide De Référence

 

1-13 

Import VPN Targets 

Import target attribute of the VPN instance 

Import Route Policy 

Import routing policy of the VPN instance 

Description Description of the VPN instance 

Maximum number of Routes 

Maximum number of routes of the VPN instance 

Interfaces 

Interface to which the VPN instance is bound 

 

domain-id domain-id [ secondary ] 

undo domain-id [ domain-id ] 

OSPF view 

2: System level 

domain-id: OSPF domain ID, in integer or dotted decimal notation. If it is in integer, it ranges from 0 to 

4,294,967,295. 

secondary: Uses the domain ID as secondary. With this keyword not specified, the domain ID 

configured is primary. 

Use the domain-id command to configure an OSPF domain ID. 

Use the undo domain-id command to restore the default. 

By default, the OSPF domain ID is 0. 

With no parameter specified, the undo domain-id command deletes all domain IDs. 

Usually, routes injected from PEs are advertised as External-LSAs. However, routes to different 

destinations in the same OSPF domain must be advertised as Type-3 LSAs. Therefore, using the same 

domain ID is required for an OSPF domain. 

# Configure the OSPF domain ID. 

<Sysname> system-view 

[Sysname] ospf 100 vpn-instance vpn1 

[Sysname-ospf-100] domain-id 234