3com S7906E Guide De Référence

 

1-18 

Use the ip binding vpn-instance command to associate an interface with a VPN instance. 

Use the undo ip binding vpn-instance command to remove the association. 

By default, an interface is associated with no VPN instance; it belongs to the public network. 

When configured on an interface, the ip binding vpn-instance command clears the IP address of the 

interface. Therefore, you must re-configure the IP address of the interface after configuring the 

command. 

# Associate Vlan-interface 1 with the VPN instance named “vpn1”. 

<Sysname> system-view 

[Sysname] interface Vlan-interface1 

[Sysname-Vlan-interface1] ip binding vpn-instance vpn1 

ip vpn-instance vpn-instance-name 

undo ip vpn-instance vpn-instance-name 

System view 

2: System level 

vpn-instance-name: Name of the VPN instance, a case-insensitive string of 1 to 31 characters. 

Use the ip vpn-instance command to create a VPN instance and enter VPN instance view. 

Use the undo ip vpn-instance command to delete a VPN instance. 

A VPN instance takes effect only after you configure an RD for it. 

Related command: route-distinguisher. 

# Create a VPN instance named vpn1. 

<Sysname> system-view 

[Sysname] ip vpn-instance vpn1 

[Sysname-vpn-instance-vpn1] 

ipv4-family vpn-instance vpn-instance-name