3com S7906E Guide De Référence
1-5
---------------------------------------------------------------
Instance ID : 0 VPN-Instance :
Instance Status : Active LSR ID : 1.1.1.1
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode: Ordered Label Retention Mode : Liberal
-----------------------------------------------------------------
Table 1-3 display mpls ldp command output description
Field
Description
Protocol Version
Version of the LDP protocol
Neighbor Liveness
Setting of the GR neighbor liveness timer
Graceful Restart
Whether GR is enabled
FT Reconnect Timer
Setting of the GR’s FT reconnect timer
Recovery Timer
Setting of the GR’s recovery timer
MTU Signaling
Whether MTU signaling is supported. Currently, the device does
not support MTU signaling.
not support MTU signaling.
Instance ID
Sequence number of the LDP instance
VPN-Instance
Name of the LDP-enabled VPN instance. For the default instance,
nothing is displayed.
nothing is displayed.
Hop Count Limit
Maximum hop count
Path Vector Limit
Maximum path vector length
Loop Detection
Whether loop detection is enabled
DU Re-advertise Flag
Whether label readvertisement is enabled for DU mode
DU Re-advertise Timer
Label readvertisement timer for DU mode
Request Retry Flag
Whether request retransmission is enabled
DU Explicit Request
Whether explicit request transmission is enabled for DU mode
Label Retention Mode
Label retention mode of the instance
Label Distribution Mode
Label distribution mode of the instance
display mpls ldp interface
Syntax
display mpls ldp interface [ all [ verbose ] | [ vpn-instance vpn-instance-name ] [ interface-type
interface-number | verbose ] ] [ | { begin | exclude | include } regular-expression ]
View
Any view