3com S7906E Guide De Référence

 

1-2 

display smart-link group { group-id | all } 

Any view 

1: Monitor level 

group-id: Smart link group ID. The minimum value is 1, while the maximum value is 48.  

all: Displays information about all smart link groups.  

Use the display smart-link group command to display information about the specified or all smart link 

groups.  

# Display information about smart link group 1.  

<Sysname> display smart-link group 1 

 Smart link group 1 information: 

 Device ID: 000f-e200-8500 

 Preemption mode: ROLE 

 Preemption delay: 1(s) 

 Control VLAN: 1 

 Protected VLAN: Reference Instance 0 to 2, 4 

 Member                    Role    State    Flush-count Last-flush-time 

 ------------------------------------------------------------------------------- 

 GigabitEthernet2/0/1      MASTER  ACTVIE    1        16:37:20 2008/04/21 

 GigabitEthernet2/0/2     SLAVE  STANDBY     2        17:45:20 2008/04/21 

Table 1-2 display smart-link group command output description 

Smart link group 1 information 

Information about smart link group 1 

Device ID 

Device ID 

Preemption mode 

Preemption mode, which can be role for preemption 
enabled or none for preemption disabled. 

Control-VLAN 

Control VLAN ID 

Protected VLAN 

Protected VLANs of the smart link group. Referenced 
MSTIs are displayed here. To view the VLANs mapped to 
the referenced MSTIs, use the display stp 
region-configuration command.  

Member 

Member of the smart link group 

Role 

Port role: master or slave