3com S7906E Guide De Référence

 

1-19 

Table 1-10 display mpls route-state command output description 

LSP-COUNT 

Number of LSPs  

VPN-INDEX 

Index number of the VPN instance 

 

display mpls static-lsp [ lsp-name  lsp-name ] [ { exclude | include } dest-addr  mask-length  ] 

[ verbose ] 

Any view 

1: Monitor level 

lsp-name lsp-name: Specifies an LSP by its name, which is a string of 1 to 15 characters. 

exclude: Specifies LSPs other than the one for the given FEC. 

include: Specifies the LSP for the given FEC. 

dest-addr mask-length: Specifies a FEC by its destination address and the length of the mask. The 

mask length is in the range 0 to 32. 

verbose: Displays detailed information. 

Use the display mpls static-lsp command to display information about static LSPs. 

Related commands: display mpls lsp, display mpls statistics lsp. 

# Display brief information about all static LSPs. 

<Sysname> display mpls static-lsp 

Name       FEC               I/O Label  I/O If                 State 

lsp1       3.3.3.9/32        NULL/100   -/Vlan1                Up 

# Display detailed information about all static LSPs. 

<Sysname> display mpls static-lsp verbose 

No             : 1 

LSP-Name       : lsp1 

LSR-Type       : Ingress 

FEC            : 3.3.3.9/32 

In-Label       : NULL 

Out-Label      : 100 

In-Interface   : -