3com S7906E Guide De Référence

 

1-43 

    Reply from 100.2.3.1: bytes=100 Sequence=3 time = 62 ms 

    Reply from 100.1.2.1: bytes=100 Sequence=4 time = 62 ms 

    

  --- FEC: LDP IPV4 PREFIX 3.3.3.9/32 ping statistics --- 

    5 packet(s) transmitted 

    5 packet(s) received 

    0.00% packet loss 

    round-trip min/avg/max = 31/55/62 ms 

remote-ip ip-address 

undo remote-ip 

MPLS LDP remote peer view 

1: Monitor level 

ip-address: Remote peer IP address. 

Use the remote-ip command to configure the remote peer IP address. 

Use the undo remote-ip command to remove the configuration. 

Note that the remote peer IP address must be the MPLS LSR ID of the remote peer. Two peers use their 

MPLS LSR IDs as the transport addresses to establish the TCP connection. 

Related commands: mpls ldp remote-peer. 

# Configure the remote peer IP address. 

<Sysname> system-view 

[Sysname] mpls ldp remote-peer BJI 

[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3 

reset mpls ldp [ all | [ vpn-instance vpn-instance-name ] [ fec mask | peer peer-id ] ] 

User view