3com S7906E Guide De Référence

 

1-2 

A PE uses connection names to identify different CCC connections. A CCC connection can have 

different names on different PEs. 

If a P router is connected with a PE, you must configure a static LSPs between them. 

# Create a remote CCC connection from CEA to CEB, setting the incoming interface to that connecting 

CEA, namely VLAN-interface 10; the next hop to 20.1.1.2; the incoming label to 100; and the outgoing 

label to 200. 

<Sysname> system-view 

[Sysname] ccc CEA-CEB interface vlan-interface 10 in-label 100 out-label 200 nexthop 20.1.1.2 

ce ce-name [ id ce-id [ range ce-range ] [ default-offset ce-offset ] ] 

undo ce ce-name 

MPLS L2VPN view, MPLS L2VPN CE view 

2: System level 

ce-name: Unique name for a CE in the current VPN of the current PE, a string of 1 to 20 characters that 

cannot include the character of “-”. 

ce-id: ID for the CE in the VPN, the range of valid values varies by device. 

ce-range: Maximum number of CEs that the current PE can support. The default is 10. The value range 

varies by device. 

ce-offset: Original CE offset. It can be either 0 or 1. The default is 0. 

Use the ce command in MPLS L2VPN view to create a CE and enter MPLS L2VPN CE view.  

Use the undo ce command to delete a CE.  

 

To create a CE, you need to specify the id keyword in the command; to enter the view of an existing CE, 

you do not need to do so. 

 

# Create a CE named ce1 for a VPN. 

<Sysname> system-view