3com S7906E Guide De Référence
1-7
z
Removing a smart link group also removes its protected VLANs.
z
If the VLAN(s) mapped to a referenced MSTI changes, the protected VLAN(s) change accordingly.
z
The VLANs that the member ports of a smart link group belong to must be configured as the
protected VLANs of the smart link group.
Related commands: smart-link group, display stp region-configuration in MSTP Commands in the
Access Volume.
Examples
# Configure the VLANs mapped to MSTIs 1 through 10 and MSTI 12 as the protected VLANs of smart
link group 1.
<Sysname> system-view
[Sysname] smart-link group 1
[Sysname-smlk-group1] protected-vlan reference-instance 1 to 10 12
reset smart-link statistics
Syntax
reset smart-link statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset smart-link statistics command to clear the statistics about flush messages.
Examples
# Clear the statistics about flush messages.
<Sysname> reset smart-link statistics
smart-link flush enable
Syntax
smart-link flush enable [ control-vlan vlan-id-list ]
undo smart-link flush enable [ control-vlan vlan-id-list ]
View
Ethernet interface view, Layer-2 aggregate interface view
Default Level
2: System level