3com S7906E Guide De Référence

 

1-23 

2: System level 

vpn-name: Name for the VPN, a case insensitive string of 1 to 31 characters that cannot include the 

character of “-“. It is used to identify a VPN uniquely on a PE. 

encapsulation: Specifies the VPN encapsulation type. 

ethernet: Uses Ethernet encapsulation. 

vlan: Uses VLAN encapsulation. 

control-word: Enables the control word option.  

no-control-word: Disables the control word option.  

Use the mpls l2vpn command to create a Kompella VPN and enter MPLS L2VPN view.  

Use the undo mpls l2vpn command to delete a VPN. 

The encapsulation type specified here must match that of the CE interface. 

At present, the S7900E series Ethernet switches do not support the control word option. 

# Create Kompella VPN named vpn1 and enter MPLS L2VPN view.  

<Sysname> system-view 

[Sysname] mpls l2vpn vpn1 encapsulation ethernet 

[Sysname-mpls-l2vpn-vpn1] 

# Create Kompella VPN named vpn2 and enter MPLS L2VPN view.  

<Sysname> system-view 

[Sysname] mpls l2vpn vpn1 encapsulation ethernet 

[Sysname-mpls-l2vpn-vpn1] mpls l2vpn vpn2 encapsulation ethernet 

[Sysname-mpls-l2vpn-vpn2] 

mpls static-l2vc destination 

transmit-vpn-label 

receive-vpn-label  receive-label-value [ tunnel-policy  tunnel-policy-name  ] [ control-word | 

no-control-word ] 

Interface view 

2: System level