3com S7906E Guide De Référence

 

1-24 

dest-router-id: Destination router ID. 

transmit-label-value: Outgoing label for the VPN, namely the outgoing label for the static level 2 VC. The 

value ranges from 16 to 1023. 

receive-label-value: Incoming label for the VPN, namely the incoming label for the static level 2 VC. The 

value ranges from 16 to 1023. 

tunnel-policy-name: Tunneling policy for the VC, a string of 1 to 19 characters. 

control-word: Enables the control word option.  

no-control-word: Disables the control word option.  

Use the mpls static-l2vc destination command to create a static VC between CEs connected to 

different PEs.  

Use the undo mpls static-l2vc command to delete the static VC. 

z 

You must configure the command on both PEs. The destination address is the IP address of the 

peer PE. The outgoing label and incoming label are respectively the incoming label and outgoing 

label of the peer. 

z 

If you do not specify the tunneling policy, or specify the tunneling policy name but do not configure 

the policy, the default policy is used. The default tunneling policy uses LSP tunnels and the load 

balance number is one. 

z 

At present, the S7900E series Ethernet switches do not support the control word option. 

# Create a static VC between CEs connected to different PEs. 

<Sysname> system-view 

[Sysname] interface vlan-interface 10 

[Sysname-Vlan-interface10] mpls static-l2vc destination 1.1.1.1 transmit-vpn-label 111 

receive-vpn-label 222 tunnel-policy pol1 

mtu mtu 

undo mtu 

MPLS L2VPN view  

2: System level 

mtu-value: MTU for the L2VPN. It ranges from 128 to 1,500 and defaults to 1,500.