3com S7906E Guide De Référence

Page de 2327
 
1-60 
tnl-policy (VPN instance view) 
Syntax 
tnl-policy tunnel-policy-name 
undo tnl-policy 
View 
VPN instance view 
Default Level 
2: System level 
Parameters 
tunnel-policy-name: Name of the tunneling policy for the VPN instance, a string of 1 to 19 characters. 
Description 
Use the tnl-policy command to associate the current VPN instance with a tunneling policy. 
Use the undo tnl-policy command to remove the association. 
When selecting tunnels from the VPN tunnel management module, an application can use the tunneling 
policy as the criterion. With no tunneling policy associated with a VPN instance, the default tunneling 
policy is used.  
Related commands: tunnel select-seq load-balance-number
Examples 
# Associate VPN instance vpn2 with tunneling policy po1. 
<Sysname> system-view 
[Sysname] tunnel-policy po1 
[Sysname-tunnel-policy-po1] tunnel select-seq lsp load-balance-number 1 
[Sysname-tunnel-policy-po1] quit 
[Sysname] ip vpn-instance vpn2 
[Sysname-vpn-instance-vpn2] route-distinguisher 22:33 
[Sysname-vpn-instance-vpn2] tnl-policy po1 
tunnel-policy 
Syntax 
tunnel-policy tunnel-policy-name 
undo tunnel-policy tunnel-policy-name 
View 
System view 
Default Level 
2: System level