3com S7906E Guide De Référence

 

1-61 

tunnel-policy-name: Name for the tunneling policy, a string of 1 to 19 characters. 

Use the tunnel-policy command to establish a tunneling policy and enter tunneling policy view. 

Use the undo tunnel-policy command to delete a tunneling policy. 

Related commands: tunnel select-seq load-balance-number. 

# Establish a tunneling policy named po1 and enter tunneling policy view. 

<Sysname> system-view 

[Sysname] tunnel-policy po1 

[Sysname-tunnel-policy-po1] 

tunnel select-seq { cr-lsp | lsp } * load-balance-number number 

undo tunnel select-seq 

Tunneling policy view 

2: System level 

cr-lsp: Specifies CR-LSP tunnels. 

lsp: Specifies LSP tunnels. 

number: Number of tunnels for load balancing, in the range 1 to 4.  

Use the tunnel select-seq  load-balance-number command to configure the preference order for 

tunnel selection and the number of tunnels for load balancing. 

Use the undo tunnel select-seq command to restore the default. 

 

The S7900E series switches do not support CR-LSP tunnels. You can configure load balancing for only 

LSP tunnels. 

 

By default, one LSP tunnel can be used. That is, only LSP tunnels can be used and the number of 

tunnels for load balancing is 1.