3com S7906E Guide De Référence

 

2-12 

Related commands: qos policy, traffic behavior, classifier behavior.  

# Configure the action of setting the customer network VLAN ID to 2 for a traffic behavior.  

<Sysname> system-view 

[Sysname] traffic behavior database 

[Sysname-behavior-database] remark customer-vlan-id 2 

remark dot1p 8021p 

undo remark dot1p 

Traffic behavior view 

2: System Level 

8021p: 802.1p precedence to be set for packets, in the range 0 to 7.  

Use the remark dot1p command to configure the action of setting 802.1p precedence for a traffic 

behavior.  

Use the undo remark dot1p command to remove the action of setting 802.1p precedence 

Note that, when the remark dot1p command is used together with the remark local-precedence 

command, the 802.1p precedence to be set for packets must be the same as the local precedence to be 

set for packets. Otherwise, the corresponding policy cannot be applied successfully.  

Related commands: qos policy, traffic behavior, classifier behavior.  

# Configure the action to set 802.1p precedence to 2 for a traffic behavior.  

<Sysname> system-view 

[Sysname] traffic behavior database 

[Sysname-behavior-database] remark dot1p 2 

remark drop-precedence drop-precedence-value 

undo remark drop-precedence 

Traffic behavior view