3com S7906E Guide De Référence

Page de 2327
 
2-15 
Description 
Use the remark ip-precedence command to configure the action of setting IP precedence for a traffic 
behavior.  
Use the undo remark ip-precedence command to remove the action of setting IP precedence.  
Related commands: qos policytraffic behaviorclassifier behavior.  
Examples 
# Configure the action to set IP precedence to 6 for a traffic behavior.  
<Sysname> system-view 
[Sysname] traffic behavior database 
[Sysname-behavior-database] remark ip-precedence 6 
remark local-precedence 
Syntax 
remark local-precedence local-precedence 
undo remark local-precedence 
View 
Traffic behavior view 
Default Level 
2: System Level 
Parameters 
local-precedence: Local precedence to be set for packets, in the range of 0 to 7.  
Description 
Use the remark local-precedence command to configure the action of setting local precedence for a 
traffic behavior.  
Use the undo remark local-precedence command to remove the action of remarking local 
precedence.  
Note that, when the remark dot1p command is used together with the remark local-precedence 
command, the 802.1p precedence to be set for packets must be the same as the local precedence to be 
set for packets. Otherwise, the corresponding policy cannot be applied successfully. 
Related commands: qos policytraffic behaviorclassifier behavior.  
Examples 
# Configure the action to set local precedence to 2 for a traffic behavior.  
<Sysname> system-view 
[Sysname] traffic behavior database 
[Sysname-behavior-database] remark local-precedence 2