3com S7906E Guide De Référence
3-5
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet 2/0/1] qos wfq
[Sysname-GigabitEthernet 2/0/1] qos bandwidth queue 0 min 100
qos sp
Syntax
qos sp
undo qos sp
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
None
Description
Use the qos sp command to configure SP queuing on the current port.
Use the undo qos sp command to restore the default queuing algorithm on the port.
By default, the switch adopts the SP queue-scheduling algorithm.
Related commands: display qos sp interface.
Examples
# Configure SP queuing on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] qos sp
qos wfq
Syntax
qos wfq
undo qos wfq
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
None