3com S7906E Guide De Référence

 

3-7 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] qos wfq 

[Sysname-GigabitEthernet2/0/1] qos wfq 0 weight 1 

[Sysname-GigabitEthernet2/0/1] qos wfq 1 weight 200 

[Sysname-GigabitEthernet2/0/1] qos wfq 2 weight 4 

[Sysname-GigabitEthernet2/0/1] qos wfq 3 weight 6 

[Sysname-GigabitEthernet2/0/1] qos wfq 4 weight 8 

[Sysname-GigabitEthernet2/0/1] qos wfq 5 weight 10 

[Sysname-GigabitEthernet2/0/1] qos wfq 6 weight 12 

[Sysname-GigabitEthernet2/0/1] qos wfq 7 weight 14 

qos wrr 

Ethernet interface view, port group view 

2: System Level 

None 

Use the qos wrr command to enable weighted round robin (WRR) on a port or port group.  

Use the undo qos wrr command to restore the default.  

By default, the switch adopts the SP queue-scheduling algorithm. 

On a port or port group with WRR enabled, the weight values of queues 0 through 7 are 1, 2, 3, 4, 5, 6, 

7, and 8 respectively.  

Related commands: display qos wrr interface. 

# Enable WRR on GigabitEthernet 2/0/1. 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] qos wrr 

qos wrr queue-id group { sp | group-id weight schedule-value }