3com S7906E Guide De Référence

Page de 2327
 
5-3 
View 
System view 
Default Level 
2: System Level 
Parameters 
dot1p-lp: Specifies the 802.1p precedence-to-local precedence mapping table.  
dot1p-dp: Specifies the 802.1p precedence-to-drop precedence mapping table.  
dscp-dp: Specifies the DSCP-to-drop precedence mapping table.  
dscp-dot1p: Specifies the DSCP-to-802.1p precedence mapping table.  
dscp-dscp: Specifies the DSCP-to-DSCP mapping table.  
Description 
Use the qos map-table command to enter specific priority mapping table view.  
Related commands: display qos map-table.  
Examples 
# Enter 802.1p precedence-to-drop precedence mapping table view.  
<Sysname> system-view 
[Sysname] qos map-table dot1p-dp 
[Sysname-maptbl-dot1p-dp] 
Port Priority Configuration Commands 
qos priority 
Syntax 
qos priority priority-value 
undo qos priority 
View 
Ethernet interface view, port group view 
Default Level 
2: System Level 
Parameters 
priority-value: Port priority to be configured. This argument is in the range 0 to 7.  
Description 
Use the qos priority command to set the port priority for a port.  
Use the undo qos priority command to restore the default port priority.  
By default, the port priority is 0.