3com S7906E Guide De Référence

 

1-16 

display  connection [ access-type { dot1x | mac-authentication | portal } | domain  isp-name | 

interface interface-type interface-number | ip ip-address | mac mac-address | ucibindex ucib-index | 

user-name user-name | vlan vlan-id ] [ slot slot-number ] 

Any view 

1: Monitor level 

access-type { dot1x | mac-authentication | portal }: Specifies user connections of an access mode, 

that is, 802.1X user connections, MAC authentication user connections, or portal authentication user 

connections. 

domain isp-name: Specifies all user connections of an ISP domain. The isp-name argument refers to 

the name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.  

interface interface-type interface-number: Specifies all user connections of an interface. 

ip ip-address: Specifies all user connections using the specified IP address. 

mac mac-address: Specifies all user connections using the specified MAC address. The MAC address 

must be in the format of H-H-H. 

ucibindex ucib-index: Specifies all user connections using the specified connection index. The value 

range 0 to 4294967295. 

user-name user-name: Specifies all user connections using the specified username. The user-name 

argument is a case-sensitive string of 1 to 80 characters and must contain the domain name. If you 

enter a username without any domain name, the system assumes that the default domain name is used 

for the username. 

vlan vlan-id: Specifies all user connections in a VLAN. The VLAN ID ranges from 1 to 4094. 

slot slot-number: Specifies the connections on a slot. 

Use the display connection command to display information about specified or all AAA user 

connections. 

This command does not apply to FTP user connections. 

Related commands: cut connection. 

# Display information about all AAA user connections. 

<Sysname> display connection 

 

Index=1   ,Username=telnet@system 

IP=10.0.0.1 

 Total 1 connection(s) matched.