3com S7906E Guide De Référence

 

1-22 

disable: Disables the idle cut function. 

enable minute: Enables the idle cut function. The minute argument refers to the allowed idle duration, in 

the range 1 to 120 minutes. 

Use the idle-cut command to enable or disable the idle cut function. 

By default, the function is disabled. 

Related commands: domain. 

# Enable the idle cut function and set the idle threshold to 50 minutes for ISP domain aabbcc.net. 

<Sysname> system-view 

[Sysname] domain aabbcc.net 

[Sysname-isp-aabbcc.net] idle-cut enable 50 

level level 

undo level 

Local user view 

3: Manage level 

level: Level of the user, which can be 0 for visit level, 1 for monitor level, 2 for system level, and 3 for 

manage level. A smaller number means a lower level. 

Use the level command to set the level of a user.  

Use the undo level command to restore the default. 

By default, the user level is 0. 

Note that: 

z 

If you specify not to perform authentication or use password authentication, the level of the 

commands that a user can use after logging in depends on the level of the user interface. For 

details about the authentication, refer to command authentication-mode  in  User Interface 

Commands of the System Volume. 

z 

If you specify an authentication method that requires the username and password, the level of the 

commands that a user can use after logging in depends on the level of the user. For an SSH user 

using RSA public key authentication, the commands that can be used depend on the level 

configured on the user interface.