3com S7906E Guide De Référence
1-14
Field
Description
Number of neighbors
Number of the LLDP neighbors connecting to
the port
the port
Number of MED neighbors
Number of the MED neighbors connecting to
the port
the port
Number of CDP neighbors
Number of the CDP neighbors connecting to
the port
the port
Number of sent optional TLV
Number of the optional TLVs contained in an
LLDPDU sent through the port
LLDPDU sent through the port
Number of received unknown TLV
Number of the unknown TLVs contained in a
received LLDPDU
received LLDPDU
display lldp tlv-config
Syntax
display lldp tlv-config [ interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display lldp tlv-config command to display the TLVs that are currently sent through a port.
If no port is specified, this command displays all the TLVs that are currently sent through all the ports.
Examples
# Display all the TLVs that are currently sent through all the ports.
<Sysname> display lldp tlv-config
LLDP tlv-config of port 97[GigabitEthernet2/0/1]:
NAME STATUS DEFAULT
Basic optional TLV:
Port Description TLV YES YES
System Name TLV YES YES
System Description TLV YES YES
System Capabilities TLV YES YES
Management Address TLV YES YES
IEEE 802.1 extend TLV:
Port VLAN ID TLV YES YES
Port And Protocol VLAN ID TLV YES YES