3com S7906E Guide De Référence
2-2
display radius scheme
Syntax
display radius scheme [ radius-scheme-name ] [ slot slot-number ]
View
Any view
Default Level
2: System level
Parameters
radius-scheme-name: RADIUS scheme name.
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the display radius scheme command to display the configuration information of a specified
RADIUS scheme or all RADIUS schemes.
Note that:
z
If no RADIUS scheme is specified, the command will display the configurations of all RADIUS
schemes.
z
If no slot number is specified, the command will display the configurations of the RADIUS schemes
on only the main processing unit.
Related commands: radius scheme.
Examples
# Display the configurations of all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName = radius1
Index=0 Type=extended
Primary Auth IP = 1.1.1.1 Port = 1812 State = active
Primary Acct IP = 1.1.1.1 Port = 1813 State = active
Second Auth IP = 0.0.0.0 Port = 1812 State = block
Second Acct IP = 0.0.0.0 Port = 1813 State = block
Auth Server Encryption Key= Not configured
Acct Server Encryption Key= Not configured
Interval for timeout(second) =3
Retransmission times for timeout =3
Interval for realtime accounting(minute) =12
Retransmission times of realtime-accounting packet =5
Retransmission times of stop-accounting packet =500
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =one