3com S7906E Guide De Référence
2-10
z
The IP addresses of the primary and secondary accounting servers cannot be the same. Otherwise,
the configuration fails.
z
The RADIUS service port configured on the device and that of the RADIUS server must be
consistent.
Related commands: key, radius scheme, state.
Examples
# Specify the IP address of the primary accounting server for RADIUS scheme radius1 as 10.110.1.2
and the UDP port of the server as 1813.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] primary accounting 10.110.1.2 1813
primary authentication (RADIUS scheme view)
Syntax
primary authentication ip-address [ port-number ]
undo primary authentication
View
RADIUS scheme view
Default Level
2: System level
Parameters
ip-address: IP address of the primary authentication/authorization server.
port-number: UDP port number of the primary authentication/authorization server, which ranges from 1
to 65535 and defaults to 1812.
Description
Use the primary authentication command to specify the primary RADIUS authentication/authorization
server.
Use the undo primary authentication command to remove the configuration.
By default, no primary RADIUS authentication/authorization server is specified.
Note that:
z
After creating a RADIUS scheme, you are supposed to configure the IP address and UDP port of
each RADIUS server (primary/secondary authentication/authorization or accounting server).
Ensure that at least one authentication/authorization server and one accounting server are
configured, and that the RADIUS service port settings on the device are consistent with the port
settings on the RADIUS servers.
z
The IP addresses of the primary and secondary authentication/authorization servers cannot be the
same. Otherwise, the configuration fails.
Related commands: key, radius scheme, state.