3com S7906E Guide De Référence

 

2-14 

Use the undo radius trap command to disable the function. 

By default, the RADIUS trap function is disabled. 

Note that: 

z 

If a NAS sends an accounting or authentication request to the RADIUS server but gets no response, 

the NAS retransmits the request. With the RADIUS trap function enabled, when the NAS transmits 

the request for half of the specified maximum number of transmission attempts, it sends a trap 

message; when the NAS transmits the request for the specified maximum number, it sends 

another trap message. 

z 

If the specified maximum number of transmission attempts is odd, the half of the number refers to 

the smallest integer greater than the half of the number. 

# Enable the RADIUS trap function for accounting servers. 

<Sysname> system-view 

[Sysname] radius trap accounting-server-down 

reset radius statistics [ slot slot-number ] 

User view 

2: System level 

slot slot-number: Specifies the slot where the interface card is inserted. 

Use the reset radius statistics command to clear RADIUS statistics. 

Related commands: display radius scheme. 

# Clear RADIUS statistics. 

<Sysname> reset radius statistics 

reset stop-accounting-buffer { radius-scheme  radius-scheme-name | session-id  session-id | 

time-range start-time stop-time | user-name user-name } [ slot slot-number ] 

User view