3com S7906E Guide De Référence

 

2-23 

Since stop-accounting requests affect the charge to users, a NAS must make its best effort to send 

every stop-accounting request to the RADIUS accounting servers. For each stop-accounting request 

getting no response in the specified period of time, the NAS buffers and resends the packet until it 

receives a response or the number of transmission retries reaches the configured limit. In the latter case, 

the NAS discards the packet.  

Related commands: reset stop-accounting-buffer, 

radius scheme, 

stop-accounting-buffer. 

# In RADIUS scheme radius1, enable the device to buffer the stop-accounting requests getting no 

responses. 

<Sysname> system-view 

[Sysname] radius scheme radius1 

[Sysname-radius-radius1] stop-accounting-buffer enable 

timer quiet minutes 

RADIUS scheme view 

2: System level 

minutes: Primary server quiet period, in minutes. It ranges from 1 to 255 and defaults to 5. 

Use the timer quiet command to set the quiet timer for the primary server, that is, the duration that the 

status of the primary server stays blocked before resuming the active state.  

Use the undo timer quiet command to restore the default. 

Related commands: display radius scheme. 

# Set the quiet timer for the primary server to 10 minutes. 

<Sysname> system-view 

[Sysname] radius scheme test1 

[Sysname-radius-test1] timer quiet 10 

timer realtime-accounting minutes