3com S7906E Guide De Référence
2-24
undo timer realtime-accounting
View
RADIUS scheme view
Default Level
2: System level
Parameters
minutes: Real-time accounting interval in minutes, must be a multiple of 3 and in the range 3 to 60, with
the default value being 12.
Description
Use the timer realtime-accounting command to set the real-time accounting interval.
Use the undo timer realtime-accounting command to restore the default.
Note that:
z
For real-time accounting, a NAS must transmit the accounting information of online users to the
RADIUS accounting server periodically. This command is for setting the interval.
z
The setting of the real-time accounting interval somewhat depends on the performance of the NAS
and the RADIUS server: a shorter interval requires higher performance. You are therefore
recommended to adopt a longer interval when there are a large number of users (more than 1000,
inclusive). The following table lists the recommended ratios of the interval to the number of users.
Table 2-3 Recommended ratios of the accounting interval to the number of users
Number of users
Real-time accounting interval (minute)
1 to 99
3
100 to 499
6
500 to 999
12
1000 or more
15 or more
Related commands: retry realtime-accounting, radius scheme.
Examples
# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
timer response-timeout (RADIUS scheme view)
Syntax
timer response-timeout seconds
undo timer response-timeout