3com S7906E Guide De Référence

 

3-16 

minutes: Real-time accounting interval in minutes. It is a multiple of 3 in the range 3 to 60 and defaults to 

12. 

Use the timer realtime-accounting command to set the real-time accounting interval.  

Use the undo timer realtime-accounting command to restore the default.  

Note that: 

z 

For real-time accounting, a NAS must transmit the accounting information of online users to the 

HWTACACS accounting server periodically. This command is for setting the interval.  

z 

The setting of the real-time accounting interval somewhat depends on the performance of the NAS 

and the HWTACACS server: a shorter interval requires higher performance. You are therefore 

recommended to adopt a longer interval when there are a large number of users (more than 1000, 

inclusive). The following table lists the recommended ratios of the interval to the number of users. 

Table 3-2 Recommended ratios of the accounting interval to the number of users 

1 to 99 

3 

100 to 499 

6 

500 to 999 

12 

1000 or more 

15 or more 

 

# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.  

<Sysname> system-view 

[Sysname] hwtacacs scheme hwt1 

[Sysname-hwtacacs-hwt1] timer realtime-accounting 51 

timer response-timeout seconds 

HWTACACS scheme view 

2: System level 

seconds: HWTACACS server response timeout period in seconds. It ranges from 1 to 300 and defaults 

to 5.