3com S7906E Guide De Référence

 

1-19 

2: System level 

None 

Use the lldp enable command to enable LLDP. 

Use the undo lldp enable command to disable LLDP. 

By default, LLDP is enabled at both the global and port levels. 

Note that LLDP takes effect on a port only when it is enabled both globally and on the port. 

# Disable LLDP on GigabitEthernet 2/0/3. 

<Sysname> system-view 

[Sysname] interface gigabitethernet2/0/3 

[Sysname-GigabitEthernet2/0/3] undo lldp enable 

undo lldp encapsulation [ snap ] 

Ethernet interface view, port group view 

2: System level 

None 

Use the lldp encapsulation snap command to configure the encapsulation format for LLDPDUs as 

SNAP on a port or a group of ports.  

Use the undo lldp encapsulation command to restore the default encapsulation format for LLDPDUs.  

By default, Ethernet II encapsulation applies.  

 

The command does not apply to LLDP-CDP packets, which use only SNAP encapsulation.