3com S7906E Guide De Référence
1-4
Field
Description
EAP Success Packets
Number of EAP Success packets sent
Received EAPOL Start Packets
Number of EAPOL Start packets received
EAPOL LogOff Packets
Number of EAPOL LogOff packets received
EAP Response/Identity Packets
Number of EAP Response/Identity packets
received
received
EAP Response/Challenge Packets
Number of EAP Response/Challenge packets
received
received
Error Packets
Number of erroneous packets received
Authenticated user
User that has passed the authentication
Controlled User(s) amount
Number of controlled users on the port
dot1x
Syntax
In system view:
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
In Ethernet interface view:
dot1x
undo dot1x
View
System view, interface view
Default Level
2: System level
Parameters
interface interface-list: Specifies a port list, which can contain multiple ports. The interface-list
argument is in the format of interface-list = { interface-type interface-number [ to interface-type
interface-number ] } & <1-10>, where interface-type represents the port type, interface-number
represents the port number, and & <1-10> means that you can provide up to 10 port indexes/port index
lists for this argument. The start port number must be smaller than the end number and the two ports
must be of the same type.
Description
Use the dot1x command in system view to enable 802.1X globally.
Use the undo dot1x command in system view to disable 802.1X globally.
Use the dot1x interface interface-list command in system view or the dot1x command in interface view
to enable 802.1X for specified ports.