3com S7906E Guide De Référence

 

1-5 

Use the undo dot1x interface interface-list command in system view or the undo dot1x command in 

interface view to disable 802.1X for specified ports. 

By default, 802.1X is neither enabled globally nor enabled for any port. 

Note that: 

z 

802.1X must be enabled both globally in system view and for the intended ports in system view or 

interface view. Otherwise, it does not function. 

z 

You can configure 802.1X parameters either before or after enabling 802.1X. 

Related commands: display dot1x. 

# Enable 802.1X for ports GigabitEthernet 2/0/1, and GigabitEthernet 2/0/5 to GigabitEthernet 2/0/7. 

<Sysname> system-view 

[Sysname] dot1x interface GigabitEthernet 2/0/1 GigabitEthernet 2/0/5 to GigabitEthernet 

2/0/7 

Or 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] dot1x 

[Sysname-GigabitEthernet2/0/1] quit 

[Sysname] interface GigabitEthernet 2/0/5 

[Sysname-GigabitEthernet2/0/5] dot1x 

[Sysname-GigabitEthernet2/0/5] quit 

[Sysname] interface GigabitEthernet 2/0/6 

[Sysname-GigabitEthernet2/0/6] dot1x 

[Sysname-GigabitEthernet2/0/6] quit 

[Sysname] interface GigabitEthernet 2/0/7 

[Sysname-GigabitEthernet2/0/7] dot1x 

# Enable 802.1X globally. 

<Sysname> system-view 

[Sysname] dot1x 

dot1x authentication-method { chap | eap | pap } 

undo dot1x authentication-method 

System view 

2: System level 

chap: Authenticates supplicants using CHAP.