3com S7906E Guide De Référence

 

1-12 

indexes/port index lists for this argument. The start port number must be smaller than the end number 

and the two ports must be of the same type. 

Use the dot1x port-control command to set the access control mode for specified or all ports. 

Use the undo dot1x port-control command to restore the default. 

The default access control mode is auto. 

Related commands: display dot1x. 

# Set the access control mode of port GigabitEthernet 2/0/1 to unauthorized-force. 

<Sysname> system-view 

[Sysname] dot1x port-control unauthorized-force interface GigabitEthernet 2/0/1 

Or 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] dot1x port-control unauthorized-force 

In system view: 

dot1x port-method { macbased | portbased } [ interface interface-list ] 

undo dot1x port-method [ interface interface-list ] 

In Ethernet interface view: 

dot1x port-method { macbased | portbased } 

undo dot1x port-method 

System view, Ethernet interface view 

2: System level 

macbased: Specifies to use the macbased authentication method. With this method, each user of a 

port must be authenticated separately, and when an authenticated user goes offline, no other users are 

affected. 

portbased: Specifies to use the portbased authentication method. With this method, after the first user 

of a port passes authentication, all other users of the port can access the network without authentication, 

and when the first user goes offline, all other users get offline at the same time. 

interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The 

interface-list argument is in the format of interface-list = { interface-type  interface-number [ to 

interface-type  interface-number ] } & <1-10>, where interface-type represents the port type,