3com S7906E Guide De Référence

Page de 2327
 
1-17 
Supplicant timeout timer (supp-timeout): Once an authenticator sends an EAP-Request/MD5 
Challenge frame to a supplicant, it starts this timer. If this timer expires but it receives no response 
from the supplicant, it retransmits the request. 
Username request timeout timer (tx-period): Once an authenticator sends an 
EAP-Request/Identity frame to a supplicant, it starts this timer. If this timer expires but it receives 
no response from the supplicant, it retransmits the request. In addition, to be compatible with 
clients that do not send EAPOL-Start requests unsolicitedly, the device multicasts 
EAP-Request/Identity frame periodically to detect the clients, with the multicast interval defined by 
tx-period. 
It is unnecessary to change the timers unless in some special or extreme network environments. The 
change of a timer takes effect immediately. 
Related commands: display dot1x
Examples 
# Set the server timeout timer to 150 seconds. 
<Sysname> system-view 
[Sysname] dot1x timer server-timeout 150  
reset dot1x statistics 
Syntax 
reset dot1x statistics interface interface-list 
View 
User view 
Default Level 
2: System level 
Parameters 
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The 
interface-list argument is in the format of interface-list = { interface-type  interface-number [ to 
interface-type  interface-number ] } & <1-10>, where interface-type represents the port type, 
interface-number represents the port number, and & <1-10> means that you can provide up to 10 port 
indexes/port index lists for this argument. The start port number must be smaller than the end number 
and the two ports must be of the same type. 
Description 
Use the reset dot1x statistics command to clear 802.1X statistics. 
With the interface  interface-list argument specified, the command clears 802.1X statistics on the 
specified ports. With the argument unspecified, the command clears global 802.1X statistics and 
802.1X statistics on all ports.  
Related commands: display dot1x
Examples 
# Clear 802.1X statistics on port GigabitEthernet 2/0/1.