3com S7906E Guide De Référence

 

1-23 

2: System level 

None 

Use the lldp notification remote-change enable command to enable trap for a port or all the ports in a 

port group. 

Use the undo lldp notification remote-change enable command to restore the default. 

By default, trap is disabled on a port. 

# Enable trap for GigabitEthernet2/0/3. 

<Sysname> system-view 

[Sysname] interface gigabitethernet2/0/3 

[Sysname-GigabitEthernet2/0/3] lldp notification remote-change enable 

lldp timer notification-interval value 

undo lldp timer notification-interval 

System view 

2: System level 

value: Interval to send trap messages, in the range 5 to 3600 (in seconds). 

Use the lldp timer notification-interval command to set the interval to send trap messages. 

Use the undo lldp timer notification-interval command to restore the default.  

By default, the interval to send trap messages is 5 seconds.  

# Set the interval to send trap messages to 8 seconds. 

<Sysname> system-view 

[Sysname] lldp timer notification-interval 8