3com S7906E Guide De Référence

 

1-1 

display port-security [ interface interface-list ] 

Any view 

2: System level 

interface-list: Ethernet port list, in the format of { interface-type interface-number [ to  interface-type 

interface-number ] }&<1-10>, where &<1-10> means that you can specify up to 10 port or port ranges. 

The starting port and ending port of a port range must be of the same type and the ending port number 

must be greater than the starting port number. 

Use the display port-security command to display port security configuration information, operation 

information, and statistics about one or more specified ports or all ports.  

Related commands: port-security enable,  port-security port-mode,  port-security ntk-mode, 

port-security intrusion-mode, port-security max-mac-count, port-security mac-address security, 

port-security authorization ignore, port-security oui, port-security trap. 

# Display port security configuration information, operation information, and statistics about all ports. 

<Sysname> display port-security 

 Equipment port-security is enabled 

 AddressLearn trap is enabled 

 Intrusion trap is enabled 

 Dot1x logon trap is enabled 

 Dot1x logoff trap is enabled 

 Dot1x logfailure trap is enabled 

 RALM logon trap is enabled 

 RALM logoff trap is enabled 

 RALM logfailure trap is enabled 

 Disableport Timeout: 20s 

 OUI value: 

   Index is 1,  OUI value is 000d1a