3com S7906E Guide De Référence

 

1-13 

[Sysname-GigabitEthernet2/0/1] undo port-security port-mode 

[Sysname-GigabitEthernet2/0/1] port-security port-mode userlogin 

port-security timer disableport time-value 

undo port-security timer disableport 

System view 

2: System level 

time-value: Silence timeout during which the port remains disabled, in seconds. It ranges from 20 to 

300.  

Use the port-security timer disableport command to set the silence timeout during which the port 

remains disabled.  

Use the undo port-security timer disableport command to restore the default.  

By default, the silence timeout is 20 seconds.  

If you configure the intrusion protection policy as disabling the port temporarily whenever it receives an 

illegal frame, you can use this command to set the silence period. 

Related commands: display port-security. 

# Configure the intrusion protection policy as disabling the port temporarily whenever it receives an 

illegal frame and set the silence timeout to 30 seconds. 

<Sysname> system-view 

[Sysname] port-security timer disableport 30 

[Sysname] interface gigabitethernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] port-security intrusion-mode disableport-temporarily 

port-security trap { addresslearned | dot1xlogfailure | dot1xlogoff |  dot1xlogon  |  intrusion  | 

ralmlogfailure | ralmlogoff | ralmlogon } 

undo port-security trap { addresslearned | dot1xlogfailure | dot1xlogoff | dot1xlogon | intrusion | 

ralmlogfailure | ralmlogoff | ralmlogon } 

System view