3com S7906E Guide De Référence

 

1-25 

# Set the delay period to send LLDPDUs to 4 seconds. 

<Sysname> system-view 

[Sysname] lldp timer tx-delay 4 

lldp timer tx-interval value 

undo lldp timer tx-interval 

System view 

2: System level 

value: Interval to send LLDPDUs, in the range 5 to 32768 (in seconds). 

Use the lldp timer tx-interval command to set the interval to send LLDPDUs. 

Use the undo lldp timer tx-interval command to restore the default. 

By default, the interval to send LLDPDUs is 30 seconds. 

To enable local device information to be updated on neighboring devices before being aged out, make 

sure the interval to send LLDPDUs is shorter than the TTL of the local device information. 

# Set the interval to send LLDPDUs to 20 seconds. 

<Sysname> system-view 

[Sysname] lldp timer tx-interval 20 

lldp  tlv-enable  { basic-tlv {  all | port-description | system-capability  |  system-description  | 

system-name  } | dot1-tlv { all | port-vlan-id | protocol-vlan-id [ vlan-id ] | vlan-name  [ vlan-id ]  } | 

dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability | 

inventory  |  location-id { civic-address  device-type country-code  { ca-type ca-value }&<1-10> | 

elin-address tel-number } | network-policy | power-over-ethernet } } 

undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description | 

system-name  } | dot1-tlv { all  | port-vlan-id | protocol-vlan-id | vlan-name  } | dot3-tlv { all | 

link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory | 

location-id | network-policy | power-over-ethernet } }