3com S7906E Guide De Référence
1-2
[Sysname-Vlan-interface2] description VLAN-INTERFACE-2
display interface vlan-interface
Syntax
display interface vlan-interface [ vlan-interface-id ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan-interface-id: VLAN interface number.
Description
Use the display interface vlan-interface command to display information about a specified or all
VLAN interfaces if no interface is specified.
Related commands: interface vlan-interface.
Examples
# Display the information of VLAN-interface 2.
<Sysname> display interface vlan-interface 2
Vlan-interface2 current state: UP
Line protocol current state: UP
Description: Vlan-interface2 Interface
The Maximum Transmit Unit is 1500
Internet Address is 192.168.0.72/24 Primary
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0000-fc00-6505
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0000-fc00-6505
Table 1-1 display interface vlan-interface command output description
Field
Description
Vlan-interface2 current state
The physical state of the VLAN interface, which can be one of the
following:
following:
z
Administratively DOWN: The administrative state of the VLAN
interface is down because it has been manually shut down with
the shutdown command.
interface is down because it has been manually shut down with
the shutdown command.
z
DOWN: The administrative state of this VLAN interface is up,
but its physical state is down. It indicates that the VLAN
corresponding to this interface does not contain any port in the
UP state (possibly because the ports are not well connected or
the lines have failed).
but its physical state is down. It indicates that the VLAN
corresponding to this interface does not contain any port in the
UP state (possibly because the ports are not well connected or
the lines have failed).
z
UP: both the administrative state and the physical state of this
VLAN interface are up.
VLAN interface are up.