3com S7906E Guide De Référence

 

1-21 

z 

This command is unavailable in the current user interface. 

z 

This command prompts for confirmation when being executed in any valid user interface. 

# Log into user interface 0 and make terminal services unavailable in VTY 0 through VTY 4. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] user-interface vty 0 4 

[Sysname-ui-vty0-4] undo shell 

% Disable ui-vty0-4 , are you sure ? [Y/N]y 

speed speed-value 

AUX interface view 

2: System level 

speed-value: Transmission speed (in bps). This argument can be 300, 600, 1200, 2400, 4800, 9600, 

19,200, 38,400, 57,600, 115,200 and defaults to 9,600. 

Use the speed command to set the transmission speed of the user interface. 

Use the undo speed command to revert to the default transmission speed. 

 

After you use the speed command to configure the transmission speed of the AUX user interface, you 

must change the corresponding configuration of the terminal emulation program running on the PC, to 

keep the configuration consistent with that on the switch.  

 

# Set the transmission speed of the AUX user interface to 9600 bps. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] user-interface aux 0 

[Sysname-ui-aux0] speed 9600