3com S7906E Guide De Référence

 

1-23 

0: Visit level 

remote-system: IP address or host name of the remote system. The host name is a string of 1 to 20 

characters, which can be specified using the ip host command. 

port-number: TCP port number assigned to Telnet service on the remote system, in the range 0 to 

65535. 

ip-address: Source IP address of the packets sent by the Telnet client. 

interface-type interface-number: Type and number of the interface through which the Telnet client sends 

packets. 

Use the telnet command to Telnet to another switch from the current switch to manage the former 

remotely. You can terminate a Telnet connection by pressing <Ctrl + K>. 

Related commands: display tcp status, ip host. 

# Telnet to the switch with the host name of Sysname2 and IP address of 129.102.0.1 from the current 

switch (with the host name of Sysname1). 

<Sysname1> telnet 129.102.0.1 

Trying 129.102.0.1 ... 

Press CTRL+K to abort 

Connected to 129.102.0.1 ... 

****************************************************************************** 

* Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved. * 

* This software is protected by copyright law and international treaties.    * 

* Without the prior written permission of 3Com Corporation and its licensors,* 

* any reproduction republication, redistribution, decompiling, reverse       * 

* engineering is strictly prohibited. Any unauthorized use of this software  * 

* or any portion of it may result in severe civil and criminal penalties, and* 

* will be prosecuted to the maximum extent possible under the applicable law.* 

****************************************************************************** 

 

<Sysname2> 

telnet ipv6 remote-system [ -i interface-type interface-number ] [ port-number ] 

User view 

0: Visit level