3com S7906E Guide De Référence

 

1-24 

remote-system: IPv6 address or host name of the remote system. An IPv6 address can be up to 46 

characters; a host name is a string of 1 to 20 characters. 

-i  interface-type interface-number: Specifies the outbound interface by interface type and interface 

number. The outbound interface is required when the destination address is a local link address. 

port-number: TCP port number assigned to Telnet service on the remote system, in the range 0 to 

65535 and defaults to 23. 

Use the telnet ipv6 command to telnet to a remote device for remote management. You can terminate 

a Telnet connection by pressing <Ctrl + K>. 

# Telnet to the device with IPv6 address 3001::1. 

<Sysname> telnet ipv6 3001::1 

Trying 3001::1 ... 

Press CTRL+K to abort 

Connected to 3001::1 ... 

****************************************************************************** 

* Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved. * 

* This software is protected by copyright law and international treaties.    * 

* Without the prior written permission of 3Com Corporation and its licensors,* 

* any reproduction republication, redistribution, decompiling, reverse       * 

* engineering is strictly prohibited. Any unauthorized use of this software  * 

* or any portion of it may result in severe civil and criminal penalties, and* 

* will be prosecuted to the maximum extent possible under the applicable law.* 

****************************************************************************** 

 

<Sysname> 

telnet client source { ip ip-address | interface interface-type interface-number } 

System view 

2: System level 

None